Product Introduction
The Ballasted Solar Roof Mount is designed for photovoltaic installations on concrete flat roofs where a ballast-based mounting method is preferred. Instead of relying primarily on roof penetration, the system uses a ballasted concrete foundation to provide structural stability for the PV array.
The mounting system is suitable for both flat rooftop and selected ground-level applications. Its modular design simplifies positioning and installation, making it practical for commercial rooftop solar projects where installation speed, structural stability, and roof conditions need to be considered together.
Product Features
Ballasted mounting method
Uses concrete ballast to stabilize the PV mounting structure without relying on conventional roof penetration.
Adjustable installation angle
Supports different tilt configurations according to the project design and solar orientation requirements.
Tested load-bearing components
Structural components are evaluated for load-bearing performance under the specified design conditions.
Fast installation
The modular ballasted configuration reduces on-site installation work and simplifies system positioning.
Standards-based engineering
Designed according to AS/NZS1170, JIS C 8955-2017, and applicable project requirements.
Technical Specifications
| Parameter | Specification |
| Product Name | Ballasted Solar Roof Mount |
| Installation Location | Concrete Flat Roof |
| Foundation Type | Concrete Ballasted Foundation |
| Installation Angle | 5°–35° |
| Wind Load | 60 m/s (216 km/h / 133 mph) |
| Snow Load | 1.4 kN/m² |
| Distance from Module Lowest Point to Ground | Roof Height |
| Applicable Module Type | Mono-crystalline, Poly-crystalline, Double Wave, Thin Film |
| Module Orientation | Horizontal, Vertical |
| Design Standard | AS/NZS1170, JIS C 8955-2017 |
| Bracket Material | AL6005-T5, Anodized |
| Fastener Material | SUS304 Stainless Steel |
| Warranty | 10 Years |
| Design Service Life | More Than 20 Years |
Product Applications
The system is mainly used for concrete flat roof solar installations, including commercial buildings, industrial facilities, warehouses, and other buildings with suitable flat roof areas. It can also be applied to selected ground-level photovoltaic projects where a ballasted mounting solution is required.
For rooftop PV projects, the ballasted solar mounting system is particularly suitable when the roof structure or waterproofing requirements make conventional penetrating mounting less desirable.
Wholesale OEM Supply
We supply ballasted solar roof mounting systems for distributors, solar installers, EPC contractors, and commercial PV projects. OEM and project-based orders can be developed according to roof conditions, module configuration, required tilt angle, structural loading, and installation requirements, with the mounting components supplied as a coordinated system for flat roof solar installations.
Hot Tags: ballasted solar roof mount, China ballasted solar roof mount manufacturers, suppliers, factory
